Air Conditioner Stamping Die
Thursday, 19 June 2014 14:20

Air Jet Loom Reed Wire

Air jet loom reed wires production, made by Hiparter, with good reed material and high quality

Die type: Progression die

Die material: SKD11, CR12MOV etc

Part material: Japanese steel SUS301, with thickness of 0.16mm

Usage: Air Jet Loom

Minimum order: 5,000 pieces or one set of reed

 

Air Jet Loom Reed Wire

 

Published in Sheet Metal Parts

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Table Cooker Stamping Die
    Table Cooker Stamping Die Three Burners table gas cooker, with 0.5mm SPCC, length 600mm, width 330mm. Made by 5 steps dies, drawing, blanking, trimming,…
    Read 6029 times
  • Air Conditioner Bottom Plate
    Air Conditioner Bottom Plate   Air conditioner back cover manufacturer--Hiparter. 1. Parts material: ST02Z with thickness 1.0mm 2. Mold type: Stage stamping mold 3.…
    Read 5935 times
  • Microwave Oven Inner Metal Door
    Microwave Oven Inner Metal Door The microwave oven cavity/chassis and door are made by metal-forming techniques, and then painted by electro-deposition, in which electric current…
    Read 13448 times
  • Stamping parts for AC outdoor unit
    Stamping parts for AC outdoor unit Specification 1. Part application: outdoor air conditioner tube sheet 2. Part material: T=0.8mm, ST02Z 3. Die material:Cr12Mov 4. Die type:…
    Read 5880 times
| + - | RTL - LTR